V216.A70.B
TPV Based Elastron V

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for low coefficient of friction requirements with good adhesion properties to TPV and EPDM rubber.

Typical Applications
Material Features
  • Adhesion to Polyolefins
  • Compliant with RoHS Directive 2011/65/EU
  • Low Coefficient of Friction Properties
  • Ozone Resistance
  • Recyclable
Certification
  • RoHS
Processing Methods
  • Injection Molding
Physical Properties
Property
Typical Value (English)
Typical Value (SI)
Test Method
Density
0,9 g/cm3
0,9 g/cm3
ASTM D 792
Durometer Hardness, 3 sec (Shore A)
70,00
70,00
ASTM D 2240
Durometer Hardness, 3 sec (Shore D)
0,00
0,00
ASTM D 2240
Tensile Strength at Break
870 Psi
6,00 MPa
ASTM D412, Method A
Mod. of %100 Elasticity
406 Psi
2,80 MPa
ASTM D412, Method A
Mod. of %300 Elasticity
653 Psi
4,50 MPa
ASTM D412, Method A
Elongation at break(%)
450,00 %
450,00 %
ASTM D412, Method A
Tear Resistance
142,75 lbf/in
25,00 N/mm
ASTM D624
Compression set (at 23⁰C, 73.40⁰F, 22h)
0,00 %
-
ASTM D 395, Type 2, Method B
Compression set (at 70⁰C, 158⁰F, 22h)
48,00 %
48,00 %
ASTM D 395, Type 2, Method B
Compression set (at 100⁰C, 212⁰F, 22h)
60,00 %
60,00 %
ASTM D 395, Type 2, Method B
Compression set (at 125⁰C, 257⁰F, 72h)
0,00 %
0,00 %
ASTM D 395, Type 2, Method B
Flow
0,00 %
-
ASTM D624
Across Flow
0,00 %
-
ASTM D624

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on rliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.