G500.A40.N.ABS

SEBS Based Elastron G

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

Typical Applications

Impact Modification

Material Features

Compliant with RoHS Directive
Designed for Excellent Adhesion to ABS, PC, PMMA, SAN, ASA, PET AND PET-G
Designed for Soft Touch Applications
Insert Molding or 2K Molding Possible
Ozone Resistance

Certification

RoHS

Processing Methods

Injection Molding

Download Datasheet/US

Download Datasheet/EU

Physical Properties

Property

Typical Value (English)

Typical Value (SI)

Test Method

Density

1,1 g/cm3

ASTM D 792

Durometer Hardness, 3 sec (Shore A)

40,00

ASTM D 2240

Durometer Hardness, 3 sec (Shore D)

0,00

ASTM D 2240

Tensile Strength at Break

580 Psi

4,00 MPa

ASTM D412, Method A

Mod. of %100 Elasticity

174 Psi

1,20 MPa

ASTM D412, Method A

Mod. of %300 Elasticity

305 Psi

2,10 MPa

ASTM D412, Method A

Elongation at break(%)

550,00 %

ASTM D412, Method A

Tear Resistance

85,65 lbf/in

15,00 N/mm

ASTM D624

Compression set (at 23⁰C, 73.40⁰F, 22h)

18,00 %

ASTM D 395, Type 2, Method B

Compression set (at 70⁰C, 158⁰F, 22h)

70,00 %

ASTM D 395, Type 2, Method B

Compression set (at 100⁰C, 212⁰F, 22h)

0,00 %

ASTM D 395, Type 2, Method B

Compression set (at 125⁰C, 257⁰F, 72h)

0,00 %

ASTM D 395, Type 2, Method B

Flow

1,96 %

ASTM D624

Across Flow

1,31 %

ASTM D624

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on rliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.