F.G100.A75.N
SEBS Based Elastron F

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods. The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation

Typical Applications
  • Food Contact Applications
Material Features
  • Adhesion to Polyolefins
  • can be used in food contact applications in USA, use limitations may apply
  • Compliant with RoHS Directive 2011/65/EU
  • Ozone Resistance
  • Recyclable
Certification
  • RoHS
Processing Methods
  • Injection Molding
Physical Properties
Property
Typical Value (English)
Typical Value (SI)
Test Method
Density
1,17 g/cm3
1,17 g/cm3
ASTM D 792
Durometer Hardness, 3 sec (Shore A)
75,00
75,00
ASTM D 2240
Durometer Hardness, 3 sec (Shore D)
0,00
0,00
ASTM D 2240
Tensile Strength at Break
1015 Psi
7,00 MPa
ASTM D412, Method A
Mod. of %100 Elasticity
334 Psi
2,30 MPa
ASTM D412, Method A
Mod. of %300 Elasticity
464 Psi
3,20 MPa
ASTM D412, Method A
Elongation at break(%)
700,00 %
700,00 %
ASTM D412, Method A
Tear Resistance
228,40 lbf/in
40,00 N/mm
ASTM D624
Compression set (at 23⁰C, 73.40⁰F, 22h)
24,00 %
24,00 %
ASTM D 395, Type 2, Method B
Compression set (at 70⁰C, 158⁰F, 22h)
59,00 %
59,00 %
ASTM D 395, Type 2, Method B
Compression set (at 100⁰C, 212⁰F, 22h)
0,00 %
-
ASTM D 395, Type 2, Method B
Compression set (at 125⁰C, 257⁰F, 72h)
0,00 %
0,00 %
ASTM D 395, Type 2, Method B
Flow
1,85 %
1,85 %
ASTM D624
Across Flow
1,16 %
1,16 %
ASTM D624

The values presenter in this document apply only to the product mentioned above and cannot be extended to other products in general. Elastron is not responsible for the results that may arise from tests outside the control of Elastron. Although Elastron bases the information and suggestions contained herein on rliable data, it does not guarantee that such information and suggestions are correct, and that the product is suitable for its intended use.